Once cut, is the strip still waterproof?
If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.
Can the LED strips be cut or trimmed?
Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut between sets of 3 LEDs.
Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.
Do the flexible LED strips require resistors?
No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.
Can the cut section of the strip be re-used?
While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.

1. Dialight Releases AR111 and MR16 LED Modules
2. OSRAM Shows Results of Complete Life-cycle Assessm
3. TSMC in Talks to Make an Acquisition of Solar, LED
4. ATG Donates iBright™ LED Tubes to Evergreen CCS
5. Carmanah Partners with frog design to Introduce th
6. IMEC Launches New Industrial Affiliation Program o
7. Diodes Incorporated Introduces LED Drivers for Sma
8. DOE Releases Second Draft of ENERGY STAR Requireme
9. Epistar Places Multiple System Order - 150th Aixtr
10. CRS Electronics Lists on TSX Venture Exchange and